SNAILFLY 260 lbs Roof Rack Cross Bars fit for 2021-2026 KIA Sorento & Sorento Hybrid with Flush Side Rails

These crossbars fit my 2023 Sorento perfectly and the instructions were clear. I was able to install them on my own without any issues, though having two people would make this a bit easier, and potentially avoid issues with scratching that others have experienced. No problems with the rubber seals or clamps, and this don’t interfere with the sunroof — plenty of clearance. Solid product — highly recommend.For those looking for a roof rack to pair, I went with the Meefar 51". Could definitely go with a larger size if desired.https://www.amazon.com/dp/B09NNGMZNQ?smid=A23J3PEDI7X6W6&ref_=chk_typ_imgToDp&th=1

They look very sleek, like they were put there by the factory. Not only is this a good addition for the look, but it is a good practical addition as well, because it helps turn your daily driver into a utility vehicle with purpose for big jobs. Very reliable. Highly endorsed.

Just installed on my New ‘24 Kia Sorento and it was a very easy install, with good directions. Brackets and cross bars are all metal - nice powder coat finish, only the lockable covers are plastic. Good rubber lining on inside of rail clamps so it grips tight without ruining the rails. Plenty of room under it for my panoramic sunroof to fully open. I will see in a couple of months of driving regarding noise and it holding tight., if all works out I would increase to a 5 star.

makes my car look extra sporty. I have no intention of using them so i cant say if theyre sturdy or do what theyre supposed to do. I just wanted them for looks and I love them

These were very easy to install. They just need 4 hex bolts per rail to assemble and after that it it just tightening and loosening.You do need to use a bit of force and make sure that the clamps for the rails are fully open to seat them. Its not a lot of force though and if the bolts are backed off most of the way so you actually see 2 threads worth of depth in the nuts then it is just a pull to open and press down with your second hand. Once seated and tightened these are not going anywhere as long as not super overloaded.they easily hold up a cargo bin up there, and its not too difficult to get into things up there either with a small ladder or opening the doors and standing on the car floor to reach up.Not complaints, they are even nicely beveled so that the bars are nice and quiet at highway speeds, and are locking so somebody cannot just take your stuff off the roof or easily steal them. Overall just a great addition to this 23' Sorento adding some much needed extra cargo space.

These bars fit my 2022 Sorento. They look nice and have a sleek appearance. The price is great.

The attached pictures show these cross bars installed on our Sorento. Installation went fairly smoothly. It did take some jiggling of the key in the lock slots when trying to unlock the covers of the riser brackets. The covers did seem to lock securely when reinstalled.Four screws hold the cross bars in the pockets of the risers. I suggest adding thread locker or lock washers to the provided hardware to keep things from loosening over time.The installation was more difficult than it could have been because the nuts securing the clamping plates on the risers had to be completely removed in order to install the risers onto the roof rack rails. This makes it more difficult and aggravating to install and remove the crossbar assemblies. Fortunately, they look good enough to leave installed on the vehicle all the time which saves from some of the grief.Overall, these have a nice look on the vehicle and have not created any marked increase in wind noise. The bars seem to be very rugged, but no loads have been placed on them yet, so time will tell.Overall: 4 stars due to uncooperative lock slots and inconvenient riser clamp installation hardware.