SNAILFLY 600 lbs No-Drill Running Boards Side Steps fit for 2023-2026 Honda Pilot

I just installed these, so I cannot say how they will hold up years from now, but I can say they feel very solid once mounted. They do not move or flex, and I am confident they are securely attached.The running boards themselves are made from decently thick aluminum, so they seem like they should hold up well. The end caps are plastic, which is pretty common for this style of running board.I installed these on my 2026 Honda Pilot TrailSport in about 30 minutes. There are three brackets per side, and each one is numbered. Bracket #2 goes at the front, #3 in the center, and #1 at the rear. The "L" on the brackets faces toward the rear of the vehicle. On the TrailSport, there is no insulation or noise blanket that needs to be trimmed or removed. The brackets simply bolt directly to the factory mounting points using two bolts each.Once the brackets are installed, lift the running board onto the brackets with the longer plastic end cap toward the front of the vehicle and tighten everything down. I tightened all of the 12 mm bolts to 20 ft-lbs.One nice feature is that you can adjust how far the boards stick out from under the vehicle before tightening them down. You can leave them tucked in close or move them out several inches. I chose to slide mine out as far as they would go. I also centered them between the wheel openings, which left 2-13/16 inches between each end of the running board and the fender opening. You can see the final position in my photos.The best installation video I found was on YouTube titled **"Snailfly Running Board Installation fit for Honda Pilot 2023-2026."** was by Snailfly_Amazon. It was much more detailed than the instructions that came with these running boards and made the installation even easier.Overall, I am very happy with these. They fit well, look great on the vehicle, and compared to the price of the OEM running boards, I think these are a very good value for the money.

The boards are the perfect fit for my Wife's Pilot. Amazon's Auto fit said otherwise. The installation was quick and easy. I used a level over my tires to match. On the driver side, you will have to cut out the insulation to see the bolt holes, two inches wide and down to the curve for wrench clearance. The wife Loved them! I would highly recommend these!

I needed these running boards for my young kids and 70+ year old mom with 2 artificial hips. Didn't want to spend the full price of OEM running boards, so these were a good option at a much lower price. Installation was very easy, probably 30 minutes or so. They offer good adjustability in terms of how big you want the step to be (and how far they stick out from the vehicle). I have the TrailSport trim, so I didn't have to trim any of the plastic under the vehicle.

I’m very satisfied with these running boards. They fit perfectly on my 2025 Honda Pilot Touring and the installation was straightforward with all the necessary hardware included. The build quality feels solid and durable, and they add a clean, stylish look to the vehicle.They make getting in and out much easier, especially for kids and shorter passengers. The surface has good grip, which is important for safety, even in wet conditions.Overall, great value for the price. I would definitely recommend these to anyone looking to upgrade their Pilot with functional and good-looking running boards.

Great product. The directions are not very helpful but installation is very straightforward. I finished the whole thing in less then an hour without lifting the car with just hand tools.

Omg ..these are great bought for my 2025 Honda pilot fit like a glove no problem looked amazing way cheaper than the dealer highly recommend!!!

Take about 40 min to mount. Fits right up. Pretty self explanatory thank goodness because the instructions could be better. But the brackets really only fit in one or the other position. Feels and looks great. Im 220lbs + and bounced all over them. Definitely adds to the look of the car!

Took me about 2 hours to install the whole thing on my Honda Pilot 2023. The installation was confusing at first, because the flap brackets that attach to the car didn't have any label on it so I couldn't tell which is front, middle, and back, or left or right side. There was an instruction paper that showed which is which, but a simple sticker labels would have eliminated the whole guessing game and make the installation process faster.I didn't need a car jack to lift the car - just layed down a furniture pad and get going. I started with the passenger side which was easy since all the bolt holes were exposed. Started with hand tight assembly and once all 3 sides were installed, I installed the board and tightened and leveled out the board.The trickiest part was the driver side. Out of 3 brackets, 2 brackets - front and middle sections - were covered by the engine covers that needed a good amount of modification. Gladly the cover material is a hardered cloth type so I just needed to use scissors and make incisions where the bracket would be sticking out, but doing that is tideous and frustrating because by this time, you're already exhausted from installing the passenger side one. It takes a bit of guessing game but my best advice would be to roughly install 3 brackets first with very very loose hand tightened screws, install the running board and tighten those screws very tight, and then tighten the rest of the bracket to car body screws then it will equalize the horizon better.Overall anyone short (5'5" or less) appreciated the running boards immensely when getting in and out of the vehicle. Taller guys might be banging their shins on the running boards sometimes but it's for the others, not you.